BaerCoil® Wire Thread Inserts – Materials

 Tensile strength at room temperatureTemperature
resistance
Applications
Stainless steel V2A
AISI 304
Material no.: 1.4301
X5CrNi18-10
> 1,400 N/mm²315°C long-term
425°C short-term
All normal applications
for thread repair and 
for thread reinforcement
Stainless steel V4A
AISI 316
X5CrNiMo17-12-2
Material no.: 1.4401
> 1.400 N/mm²315°C long-term
425°C short-term
- improved corrosion resistance
- reduced thread friction
- for high-alloy CrNr steel screws
Applications in seawater and chlorinated water
Inconel X750
NiCr15Fe7TiAl
material no.: 2.4669

Nimonic 90
NiCr20Co18Ti
material no.: 2.4632
> 1,150 N/mm²



> 1,150 N/mm²
550°C long-term
750°C short-term


600°C long-term
900°C short-term
- high thermal resistance
- high corrosion protection
- Aerospace
- turbochargers
- aircraft engines
- turbines
- thermal power plants
Bronze
CuSn6
CW452K
Material No.: 2.1020
> 900 N/mm²250°C long-term
300°C short-term
- Movement threads
- Cr-Ni screws
- Cu workpieces
- Non-magnetic
Applications in seawater.
Best electrical conductivity

Other materials such as Nitronic 60, Inconel 625, Hastelloy, as well as special materials are available on request.

various thread inserts from BAER for different materials

BaerCoil® wire thread inserts – surface treatments

 ColorApplications
Cadmium-platedyellow, glossyFor high corrosion resistance and high lubrication to prevent seizing. Suitable up to 250°C.
GalvanizedyellowFor high corrosion resistance, alternative for cadmium plating.
Silver platedsilverprevents thread seizure at high temperatures.
Cadmium plated &
olive colored
olive grayAccording to US military specifications like NASM21209
Dry film lubricationgrayAdditional lubrication for applications with high frictional force, e.g. recommended for applications of inserts - type: "screw grip
BaerCoil protectionblack, glossyprevents corrosion between the thread insert and the holding thread. Facilitates and improves installation.